shell bypass 403
UnknownSec Shell
:
/
usr
/
src
/
linux-headers-6.8.0-83-generic
/
include
/
linux
/
usb
/ [
drwxr-xr-x
]
upload
mass deface
mass delete
console
info server
name :
tcpm.h
/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2015-2017 Google, Inc */ #ifndef __LINUX_USB_TCPM_H #define __LINUX_USB_TCPM_H #include <linux/bitops.h> #include <linux/usb/typec.h> #include "pd.h" enum typec_cc_status { TYPEC_CC_OPEN, TYPEC_CC_RA, TYPEC_CC_RD, TYPEC_CC_RP_DEF, TYPEC_CC_RP_1_5, TYPEC_CC_RP_3_0, }; /* Collision Avoidance */ #define SINK_TX_NG TYPEC_CC_RP_1_5 #define SINK_TX_OK TYPEC_CC_RP_3_0 enum typec_cc_polarity { TYPEC_POLARITY_CC1, TYPEC_POLARITY_CC2, }; /* Time to wait for TCPC to complete transmit */ #define PD_T_TCPC_TX_TIMEOUT 100 /* in ms */ #define PD_ROLE_SWAP_TIMEOUT (MSEC_PER_SEC * 10) #define PD_PPS_CTRL_TIMEOUT (MSEC_PER_SEC * 10) enum tcpm_transmit_status { TCPC_TX_SUCCESS = 0, TCPC_TX_DISCARDED = 1, TCPC_TX_FAILED = 2, }; enum tcpm_transmit_type { TCPC_TX_SOP = 0, TCPC_TX_SOP_PRIME = 1, TCPC_TX_SOP_PRIME_PRIME = 2, TCPC_TX_SOP_DEBUG_PRIME = 3, TCPC_TX_SOP_DEBUG_PRIME_PRIME = 4, TCPC_TX_HARD_RESET = 5, TCPC_TX_CABLE_RESET = 6, TCPC_TX_BIST_MODE_2 = 7 }; /* Mux state attributes */ #define TCPC_MUX_USB_ENABLED BIT(0) /* USB enabled */ #define TCPC_MUX_DP_ENABLED BIT(1) /* DP enabled */ #define TCPC_MUX_POLARITY_INVERTED BIT(2) /* Polarity inverted */ /** * struct tcpc_dev - Port configuration and callback functions * @fwnode: Pointer to port fwnode * @get_vbus: Called to read current VBUS state * @get_current_limit: * Optional; called by the tcpm core when configured as a snk * and cc=Rp-def. This allows the tcpm to provide a fallback * current-limit detection method for the cc=Rp-def case. * For example, some tcpcs may include BC1.2 charger detection * and use that in this case. * @set_cc: Called to set value of CC pins * @apply_rc: Optional; Needed to move TCPCI based chipset to APPLY_RC state * as stated by the TCPCI specification. * @get_cc: Called to read current CC pin values * @set_polarity: * Called to set polarity * @set_vconn: Called to enable or disable VCONN * @set_vbus: Called to enable or disable VBUS * @set_current_limit: * Optional; called to set current limit as negotiated * with partner. * @set_pd_rx: Called to enable or disable reception of PD messages * @set_roles: Called to set power and data roles * @start_toggling: * Optional; if supported by hardware, called to start dual-role * toggling or single-role connection detection. Toggling stops * automatically if a connection is established. * @try_role: Optional; called to set a preferred role * @pd_transmit:Called to transmit PD message * @set_bist_data: Turn on/off bist data mode for compliance testing * @enable_frs: * Optional; Called to enable/disable PD 3.0 fast role swap. * Enabling frs is accessory dependent as not all PD3.0 * accessories support fast role swap. * @frs_sourcing_vbus: * Optional; Called to notify that vbus is now being sourced. * Low level drivers can perform chip specific operations, if any. * @enable_auto_vbus_discharge: * Optional; TCPCI spec based TCPC implementations can optionally * support hardware to autonomously dischrge vbus upon disconnecting * as sink or source. TCPM signals TCPC to enable the mechanism upon * entering connected state and signals disabling upon disconnect. * @set_auto_vbus_discharge_threshold: * Mandatory when enable_auto_vbus_discharge is implemented. TCPM * calls this function to allow lower levels drivers to program the * vbus threshold voltage below which the vbus discharge circuit * will be turned on. requested_vbus_voltage is set to 0 when vbus * is going to disappear knowingly i.e. during PR_SWAP and * HARD_RESET etc. * @is_vbus_vsafe0v: * Optional; TCPCI spec based TCPC implementations are expected to * detect VSAFE0V voltage level at vbus. When detection of VSAFE0V * is supported by TCPC, set this callback for TCPM to query * whether vbus is at VSAFE0V when needed. * Returns true when vbus is at VSAFE0V, false otherwise. * @set_partner_usb_comm_capable: * Optional; The USB Communications Capable bit indicates if port * partner is capable of communication over the USB data lines * (e.g. D+/- or SS Tx/Rx). Called to notify the status of the bit. * @check_contaminant: * Optional; The callback is called when CC pins report open status * at the end of the deboumce period or when the port is still * toggling. Chip level drivers are expected to check for contaminant * and call tcpm_clean_port when the port is clean. */ struct tcpc_dev { struct fwnode_handle *fwnode; int (*init)(struct tcpc_dev *dev); int (*get_vbus)(struct tcpc_dev *dev); int (*get_current_limit)(struct tcpc_dev *dev); int (*set_cc)(struct tcpc_dev *dev, enum typec_cc_status cc); int (*apply_rc)(struct tcpc_dev *dev, enum typec_cc_status cc, enum typec_cc_polarity polarity); int (*get_cc)(struct tcpc_dev *dev, enum typec_cc_status *cc1, enum typec_cc_status *cc2); int (*set_polarity)(struct tcpc_dev *dev, enum typec_cc_polarity polarity); int (*set_vconn)(struct tcpc_dev *dev, bool on); int (*set_vbus)(struct tcpc_dev *dev, bool on, bool charge); int (*set_current_limit)(struct tcpc_dev *dev, u32 max_ma, u32 mv); int (*set_pd_rx)(struct tcpc_dev *dev, bool on); int (*set_roles)(struct tcpc_dev *dev, bool attached, enum typec_role role, enum typec_data_role data); int (*start_toggling)(struct tcpc_dev *dev, enum typec_port_type port_type, enum typec_cc_status cc); int (*try_role)(struct tcpc_dev *dev, int role); int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type, const struct pd_message *msg, unsigned int negotiated_rev); int (*set_bist_data)(struct tcpc_dev *dev, bool on); int (*enable_frs)(struct tcpc_dev *dev, bool enable); void (*frs_sourcing_vbus)(struct tcpc_dev *dev); int (*enable_auto_vbus_discharge)(struct tcpc_dev *dev, bool enable); int (*set_auto_vbus_discharge_threshold)(struct tcpc_dev *dev, enum typec_pwr_opmode mode, bool pps_active, u32 requested_vbus_voltage, u32 pps_apdo_min_voltage); bool (*is_vbus_vsafe0v)(struct tcpc_dev *dev); void (*set_partner_usb_comm_capable)(struct tcpc_dev *dev, bool enable); void (*check_contaminant)(struct tcpc_dev *dev); }; struct tcpm_port; struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc); void tcpm_unregister_port(struct tcpm_port *port); void tcpm_vbus_change(struct tcpm_port *port); void tcpm_cc_change(struct tcpm_port *port); void tcpm_sink_frs(struct tcpm_port *port); void tcpm_sourcing_vbus(struct tcpm_port *port); void tcpm_pd_receive(struct tcpm_port *port, const struct pd_message *msg); void tcpm_pd_transmit_complete(struct tcpm_port *port, enum tcpm_transmit_status status); void tcpm_pd_hard_reset(struct tcpm_port *port); void tcpm_tcpc_reset(struct tcpm_port *port); void tcpm_port_clean(struct tcpm_port *port); bool tcpm_port_is_toggling(struct tcpm_port *port); void tcpm_port_error_recovery(struct tcpm_port *port); #endif /* __LINUX_USB_TCPM_H */
© 2026 UnknownSec