shell bypass 403
UnknownSec Shell
:
/
usr
/
src
/
linux-headers-6.8.0-36-generic
/
include
/
linux
/ [
drwxr-xr-x
]
upload
mass deface
mass delete
console
info server
name :
rmi.h
/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2011-2016 Synaptics Incorporated * Copyright (c) 2011 Unixphere */ #ifndef _RMI_H #define _RMI_H #include <linux/kernel.h> #include <linux/device.h> #include <linux/interrupt.h> #include <linux/input.h> #include <linux/kfifo.h> #include <linux/list.h> #include <linux/module.h> #include <linux/types.h> #define NAME_BUFFER_SIZE 256 /** * struct rmi_2d_axis_alignment - target axis alignment * @swap_axes: set to TRUE if desired to swap x- and y-axis * @flip_x: set to TRUE if desired to flip direction on x-axis * @flip_y: set to TRUE if desired to flip direction on y-axis * @clip_x_low - reported X coordinates below this setting will be clipped to * the specified value * @clip_x_high - reported X coordinates above this setting will be clipped to * the specified value * @clip_y_low - reported Y coordinates below this setting will be clipped to * the specified value * @clip_y_high - reported Y coordinates above this setting will be clipped to * the specified value * @offset_x - this value will be added to all reported X coordinates * @offset_y - this value will be added to all reported Y coordinates * @rel_report_enabled - if set to true, the relative reporting will be * automatically enabled for this sensor. */ struct rmi_2d_axis_alignment { bool swap_axes; bool flip_x; bool flip_y; u16 clip_x_low; u16 clip_y_low; u16 clip_x_high; u16 clip_y_high; u16 offset_x; u16 offset_y; u8 delta_x_threshold; u8 delta_y_threshold; }; /** This is used to override any hints an F11 2D sensor might have provided * as to what type of sensor it is. * * @rmi_f11_sensor_default - do not override, determine from F11_2D_QUERY14 if * available. * @rmi_f11_sensor_touchscreen - treat the sensor as a touchscreen (direct * pointing). * @rmi_f11_sensor_touchpad - thread the sensor as a touchpad (indirect * pointing). */ enum rmi_sensor_type { rmi_sensor_default = 0, rmi_sensor_touchscreen, rmi_sensor_touchpad }; #define RMI_F11_DISABLE_ABS_REPORT BIT(0) /** * struct rmi_2d_sensor_data - overrides defaults for a 2D sensor. * @axis_align - provides axis alignment overrides (see above). * @sensor_type - Forces the driver to treat the sensor as an indirect * pointing device (touchpad) rather than a direct pointing device * (touchscreen). This is useful when F11_2D_QUERY14 register is not * available. * @disable_report_mask - Force data to not be reported even if it is supported * by the firware. * @topbuttonpad - Used with the "5 buttons touchpads" found on the Lenovo 40 * series * @kernel_tracking - most moderns RMI f11 firmwares implement Multifinger * Type B protocol. However, there are some corner cases where the user * triggers some jumps by tapping with two fingers on the touchpad. * Use this setting and dmax to filter out these jumps. * Also, when using an old sensor using MF Type A behavior, set to true to * report an actual MT protocol B. * @dmax - the maximum distance (in sensor units) the kernel tracking allows two * distincts fingers to be considered the same. */ struct rmi_2d_sensor_platform_data { struct rmi_2d_axis_alignment axis_align; enum rmi_sensor_type sensor_type; int x_mm; int y_mm; int disable_report_mask; u16 rezero_wait; bool topbuttonpad; bool kernel_tracking; int dmax; int dribble; int palm_detect; }; /** * struct rmi_gpio_data - overrides defaults for a single F30/F3A GPIOs/LED * chip. * @buttonpad - the touchpad is a buttonpad, so enable only the first actual * button that is found. * @trackstick_buttons - Set when the function 30 or 3a is handling the physical * buttons of the trackstick (as a PS/2 passthrough device). * @disable - the touchpad incorrectly reports F30/F3A and it should be ignored. * This is a special case which is due to misconfigured firmware. */ struct rmi_gpio_data { bool buttonpad; bool trackstick_buttons; bool disable; }; /* * Set the state of a register * DEFAULT - use the default value set by the firmware config * OFF - explicitly disable the register * ON - explicitly enable the register */ enum rmi_reg_state { RMI_REG_STATE_DEFAULT = 0, RMI_REG_STATE_OFF = 1, RMI_REG_STATE_ON = 2 }; /** * struct rmi_f01_power_management -When non-zero, these values will be written * to the touch sensor to override the default firmware settigns. For a * detailed explanation of what each field does, see the corresponding * documention in the RMI4 specification. * * @nosleep - specifies whether the device is permitted to sleep or doze (that * is, enter a temporary low power state) when no fingers are touching the * sensor. * @wakeup_threshold - controls the capacitance threshold at which the touch * sensor will decide to wake up from that low power state. * @doze_holdoff - controls how long the touch sensor waits after the last * finger lifts before entering the doze state, in units of 100ms. * @doze_interval - controls the interval between checks for finger presence * when the touch sensor is in doze mode, in units of 10ms. */ struct rmi_f01_power_management { enum rmi_reg_state nosleep; u8 wakeup_threshold; u8 doze_holdoff; u8 doze_interval; }; /** * struct rmi_device_platform_data_spi - provides parameters used in SPI * communications. All Synaptics SPI products support a standard SPI * interface; some also support what is called SPI V2 mode, depending on * firmware and/or ASIC limitations. In V2 mode, the touch sensor can * support shorter delays during certain operations, and these are specified * separately from the standard mode delays. * * @block_delay - for standard SPI transactions consisting of both a read and * write operation, the delay (in microseconds) between the read and write * operations. * @split_read_block_delay_us - for V2 SPI transactions consisting of both a * read and write operation, the delay (in microseconds) between the read and * write operations. * @read_delay_us - the delay between each byte of a read operation in normal * SPI mode. * @write_delay_us - the delay between each byte of a write operation in normal * SPI mode. * @split_read_byte_delay_us - the delay between each byte of a read operation * in V2 mode. * @pre_delay_us - the delay before the start of a SPI transaction. This is * typically useful in conjunction with custom chip select assertions (see * below). * @post_delay_us - the delay after the completion of an SPI transaction. This * is typically useful in conjunction with custom chip select assertions (see * below). * @cs_assert - For systems where the SPI subsystem does not control the CS/SSB * line, or where such control is broken, you can provide a custom routine to * handle a GPIO as CS/SSB. This routine will be called at the beginning and * end of each SPI transaction. The RMI SPI implementation will wait * pre_delay_us after this routine returns before starting the SPI transfer; * and post_delay_us after completion of the SPI transfer(s) before calling it * with assert==FALSE. */ struct rmi_device_platform_data_spi { u32 block_delay_us; u32 split_read_block_delay_us; u32 read_delay_us; u32 write_delay_us; u32 split_read_byte_delay_us; u32 pre_delay_us; u32 post_delay_us; u8 bits_per_word; u16 mode; void *cs_assert_data; int (*cs_assert)(const void *cs_assert_data, const bool assert); }; /** * struct rmi_device_platform_data - system specific configuration info. * * @reset_delay_ms - after issuing a reset command to the touch sensor, the * driver waits a few milliseconds to give the firmware a chance to * re-initialize. You can override the default wait period here. * @irq: irq associated with the attn gpio line, or negative */ struct rmi_device_platform_data { int reset_delay_ms; int irq; struct rmi_device_platform_data_spi spi_data; /* function handler pdata */ struct rmi_2d_sensor_platform_data sensor_pdata; struct rmi_f01_power_management power_management; struct rmi_gpio_data gpio_data; }; /** * struct rmi_function_descriptor - RMI function base addresses * * @query_base_addr: The RMI Query base address * @command_base_addr: The RMI Command base address * @control_base_addr: The RMI Control base address * @data_base_addr: The RMI Data base address * @interrupt_source_count: The number of irqs this RMI function needs * @function_number: The RMI function number * * This struct is used when iterating the Page Description Table. The addresses * are 16-bit values to include the current page address. * */ struct rmi_function_descriptor { u16 query_base_addr; u16 command_base_addr; u16 control_base_addr; u16 data_base_addr; u8 interrupt_source_count; u8 function_number; u8 function_version; }; struct rmi_device; /** * struct rmi_transport_dev - represent an RMI transport device * * @dev: Pointer to the communication device, e.g. i2c or spi * @rmi_dev: Pointer to the RMI device * @proto_name: name of the transport protocol (SPI, i2c, etc) * @ops: pointer to transport operations implementation * * The RMI transport device implements the glue between different communication * buses such as I2C and SPI. * */ struct rmi_transport_dev { struct device *dev; struct rmi_device *rmi_dev; const char *proto_name; const struct rmi_transport_ops *ops; struct rmi_device_platform_data pdata; struct input_dev *input; }; /** * struct rmi_transport_ops - defines transport protocol operations. * * @write_block: Writing a block of data to the specified address * @read_block: Read a block of data from the specified address. */ struct rmi_transport_ops { int (*write_block)(struct rmi_transport_dev *xport, u16 addr, const void *buf, size_t len); int (*read_block)(struct rmi_transport_dev *xport, u16 addr, void *buf, size_t len); int (*reset)(struct rmi_transport_dev *xport, u16 reset_addr); }; /** * struct rmi_driver - driver for an RMI4 sensor on the RMI bus. * * @driver: Device driver model driver * @reset_handler: Called when a reset is detected. * @clear_irq_bits: Clear the specified bits in the current interrupt mask. * @set_irq_bist: Set the specified bits in the current interrupt mask. * @store_productid: Callback for cache product id from function 01 * @data: Private data pointer * */ struct rmi_driver { struct device_driver driver; int (*reset_handler)(struct rmi_device *rmi_dev); int (*clear_irq_bits)(struct rmi_device *rmi_dev, unsigned long *mask); int (*set_irq_bits)(struct rmi_device *rmi_dev, unsigned long *mask); int (*store_productid)(struct rmi_device *rmi_dev); int (*set_input_params)(struct rmi_device *rmi_dev, struct input_dev *input); void *data; }; /** * struct rmi_device - represents an RMI4 sensor device on the RMI bus. * * @dev: The device created for the RMI bus * @number: Unique number for the device on the bus. * @driver: Pointer to associated driver * @xport: Pointer to the transport interface * */ struct rmi_device { struct device dev; int number; struct rmi_driver *driver; struct rmi_transport_dev *xport; }; struct rmi4_attn_data { unsigned long irq_status; size_t size; void *data; }; struct rmi_driver_data { struct list_head function_list; struct rmi_device *rmi_dev; struct rmi_function *f01_container; struct rmi_function *f34_container; bool bootloader_mode; int num_of_irq_regs; int irq_count; void *irq_memory; unsigned long *irq_status; unsigned long *fn_irq_bits; unsigned long *current_irq_mask; unsigned long *new_irq_mask; struct mutex irq_mutex; struct input_dev *input; struct irq_domain *irqdomain; u8 pdt_props; u8 num_rx_electrodes; u8 num_tx_electrodes; bool enabled; struct mutex enabled_mutex; struct rmi4_attn_data attn_data; DECLARE_KFIFO(attn_fifo, struct rmi4_attn_data, 16); }; int rmi_register_transport_device(struct rmi_transport_dev *xport); void rmi_unregister_transport_device(struct rmi_transport_dev *xport); void rmi_set_attn_data(struct rmi_device *rmi_dev, unsigned long irq_status, void *data, size_t size); int rmi_driver_suspend(struct rmi_device *rmi_dev, bool enable_wake); int rmi_driver_resume(struct rmi_device *rmi_dev, bool clear_wake); #endif
© 2026 UnknownSec